Copper-Steel Clad Sheet:
*Carbon steel as basic metal, cladded with T2 red copper/brass H65/C22000 /CZ101 can be one side cladding or both sides cladding.
*Special technical treatment to merged the two material into a single whole and can not be pilled off
*Thickness combination can be customerized.
*High strength,good electrical and thermal conductivity ,excellent corrosive resistance and extensibility.
*Applications:electronic spare parts,USB sockets, connectors, automobile radiators, gas heaters, LED spare parts, coins, hardware industries,decoration etc.
*Base layer material: Simple carbon steel / Q195
*Clad layer material: Brass H90 / C22000/CZ101
*Thickness range: 0.2mm ~2.0mm
*Applications: Bullet shell, Game coin, Indoor decorations etc.
Advantages for bullet shell:
*Ensuring the performance of the bullet
*Saving the brass material,low cost
*preventing the corrosion occur when using or storage
*The lubrication of surface brass can reduce the bullet's wearing to the Chamber
*Excellent cold pressing manufacturability
Clad metal has an excellent property that any single metal can not compare with, these metals make an excellent complement to each other. The biggest advantage of this kind of clad plate is that its materials and thickness can be selected according to the needs of different clients.
|No||Temper||Tensile Strength (N/mn2)||Elongation (%)||Applications|
|1||TM||≥280||≥45||Extremely good extensibility, Suitable for very deep pressing|
|2||M||≥290||≥33||Good extensibility, Suitable for general pressing capabilities|
|3||Y₂||350-450||≥5||With certain degree of extensibility, Suitable for components requiring bending and certain strength|
|4||Y||≥460||-||Suitable for components processed through flat punching or simple bending with requirements for strength|
|5||TY||≥650||-||Very high strength, Fatigue resistance, and electricity|
TM temper: Extreme soft, M temper: Soft
Y₂temper: Semi-hard, Y temper: Hard, TY temper: Extra hard